Description
Note to purchased CDE900PRO+TCODE customers:
Please contact the customer service after receiving the order to obtain tcode activation software, no physical card
Note to buy CDE900PRO only customers:
CDE900Pro itself only has OBD2/EOBD diagnose, If you need to purchase the software package you can click the following link to purchase TCODE to activate it
99.95 usd for All Supported Cars Full system diagnostic Free Lifetime Update
39.95 usd for All Supported Cars 4 systems(ECM ABS SRS TCM) Free Lifetime Update
59.95 usd For 1 Car Brand Full Function(Full system + 28 Reset Functions + ECU Coding+ Active Test(Bl-Directional Control) ) Free Lifetime Update
15.95 usd For All Supported Car 1 Reset Functions Free Lifetime Update
79.95 usd For All Supported Car 28 Reset Functions Free Lifetime Update
What is the difference between CDE900Pro from others?
1. 5 inch HD Display Screen
2. 2G RAM+32G ROM,Max Up To 256G By TF Card
3. Android Operating System
4. Multi features can be purchased according to individual needs, and all purchasable features will be update free lifetime after successful purchase.
5. One-Click WIFI System Upgrade
6. 3150mAh Battery
7. 17 Languages:English,French,German,Italian,Spanish,Portuguese,Japanese, Russian,Dutch,Hungarian, Slovakia,Greek,Arabic,Korean,Turkish,Polish,Czech
Full OBD/EOBD Function Featuring 10 modes of OBD2 tests Lifetime Free
*Read Codes:Read extensive current, pending and permanent codes in OBD system quickly
*Clean Codes:Clear detected fault codes and turn off the Check Engine Light efficiently
*Live Date:View graphical live data of vehicle’s computer module(s) for easy analyses
*Freeze Frame:View the vehicle’s operating parameters at the moment a DTC is detected
*I/M readiness:Read I/M readiness status to have a vehicle inspected for state emissions compliance
*O2 sensor test:Perform O2 sensor test to check fuel efficiency and vehicle emissions
*On-Borad Monitor Test:Read the results of on-board diagnostic monitoring tests for specific components/systems
*Car Information Display:Retrieve the vehicle information of VIN, CINs, and CVNs completely
*EVAP Test:Perform the component Test by allowing initiating a leak test for the vehicle’s EVAP system
*DTC lookup:Every code in CDE900 comes with a description to aid technicians in efficient vehicle diagnostics and repair.
CDE900Pro Expansion Function Introduction
–
Extra Pay $39.95 For All Cars 4 System Diagnostics Lifetime Free Updates
–
1.ECM (Engine System) Diagnose:
You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.
2.ABS (Anti-lock Braking System) Diagnose:
By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.
3.SRS (Airbag) Diagnose:
By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.
4.TCM (Transmission System) Diagnose:
AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. MUCAR CDE900 obd2 scanner can read/clear codes and view live data retrieve the error information from AT.
Extra Pay $99.95 For All Cars Full System Diagnostics Lifetime Free Updates
–
The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems,such as ABS,SRS,Engine,Transmission,Brake System,Emission System,Fuel system,Light system,Wiper System etc.
Extra Pay $59.95 For 1 Cars Brand Full System Diagnostics + 28 Reset Service + ECU Coding + Action Test Lifetime Free Updates
–
ECU Coding:
The Coding function is used to re-flash the vehicle control modules.It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts;Provide solutions for the issues of Drivability,Fuel Efficiency,Power Loss,Fault Codes,Durability of Mechanical Parts etc.;Brake the limitations and restrictions;make full use of the car hidden features,like change the chimes on car,set how many times the one-touch signal flickers for one touch,remember settings for Start/Stop systems,and more.
Active Test(BI-Directional Control):
If the actuator is normal,without using the vehicle’s controls,to get a significant boost in effectiveness:
[Turn on the radiator fan|Modulate the throttle|Open/close windows|Operate mirrors|Turn on/off the lights|Turn on/off the sound horn|Test door lock …]
Extra Pay $15.95 For All Cars 1 Reset Service Lifetime Free Updates
Extra Pay $79.95 For All Cars 28 Reset Service Lifetime Free Updates
–
*Not all vehicles support all reset functions. Please send vehicle model and year to customer service for inquiry.
1.Oil Reset
If the oil maintenance light is on, the car needs to be maintained. After the maintenance, the driving time and other data should be reset to zero, so that the maintenance light will be turned off, and the car system will enable a new maintenance cycle.
2.Brake Reset
When the brake is used to a certain thickness, the brake sensor line will be worn, and the brake pad sensor line will send a signal to the car computer to prompt the replacement of the brake pad. After replacing the brake pads, the brake needs to be reset, otherwise the car will still alarm.
3.BMS battery reset
For a vehicle with the battery management function, if the battery status is detected as faulty (aging or damaged), the fault code will saved in the ECU. After replacing the battery and running “BMS Reset”, it can delete the fault code and re-match, based on the relevant information of the existing battery as the standard, let the monitoring unit monitor. Avoid false positives from instrument error messages
4.DPF(Diesel Particulate Filter) Regeneration
Diesel Particulate Filter in the working process, particles will accumulate in the filter, when it reaches a certain value, it will lead to engine power and economic performance decline, must be removed in time to ensure that DPF continues to work normally.
5.SAS Steering Angel Reset
After the vehicle is disassembled or replaced with parts related to the steering function, the steering Angle learning function needs to be performed.
6.TPMS Tire Pressure Reset
only applicable to vehicles without a tire pressure sensors.
if the tire pressure is too low or air leaking, replacing or installing tire pressure monitoring equipment, replacing tires, tire pressure sensor damage, and cars with tire pressure monitoring function in the case of tire transposition etc,.Tire pressure reset is required after vehicle maintenance and turn off the tire pressure fault indicator light.
7.IMMO Key matching
When replacing the ignition switch key, ignition switch, combined instrument panel, engine control unit (ECU), body control module (BCM) and remote control battery, IMMO key matching is required.
8.ABS Bleeding
In the case of replacement of ABS system, ABS pump, brake pump, brake line and brake fluid, it is necessary to bleeding the ABS system through the ABS bleeding function.
9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.
10.Suspension Reset
When the body height sensor or control module in the air suspension system is replaced, or the car level is wrong, the vehicle needs to perform this function to adjust the body height sensor for level calibration
11.Gearbox (Transmission )Reset
When the transmission parts wear and aging become serious, the adaptive learning of the control unit does not work, and the parts need to be repaired and replaced, then the automatic transmission control unit needs to be forced to learn.
12.AFS Headlamp Reset
This function can initialize the adaptive headlight system. The adaptive headlight system can decide whether to automatically turn on the headlights according to the ambient light intensity, and monitor the vehicle’s driving speed, body attitude, etc., and timely adjust the lighting Angle of the headlights. When replacing a new headlight, headlight automatic motor, or there is a fault code that is not set by the headlight, it is necessary to perform headlight matching features.
13.Injector Coding
After replacing the ECU or injector, each cylinder injector needs to be coded to confirm or recode. So that the cylinder can better identify each cylinder injector, accurate control of fuel injection.
14.ETS Learning(throttle matching)
Need to perform throttle matching: Replace the electronic control unit, power off the electronic control unit, replace the electronic throttle assembly, replace or disassemble the intake port, clean the throttle.
15.Gear Learning
Gear learning is required when replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, and fault code that the gear has not learned,it is necessary to gear learning.
16.EGR Self-Learning
If the EGR fails, the engine/EPC fault indicator light of the vehicle instrument will light up, and the EGR self-learning function can turn off the fault indicator light after cleaning or replacing the EGR valve.
17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car adblue) is replaced or filled up, Turn off the adblue fault indicator light by adblue reset.
19.Airbag Reset
this function is only available for some models, please consult the seller
This function resets the airbag data to clear the airbag collision fault indicator.
20.Coolant Bleeding
Use this function to activate the electronic water pump before bleeding the coolant system. Electronic water pumping systems are commonly found in BMW models.
21.Tyre modification
Tire size parameter setting after tire modification or replacement.
22.Language Change
This function is used to change the system language of the vehicle central control panel.
23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
24.odometer read
this function is only used to read the actual mileage and does not support mileage modification or zeroing
25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).
26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.
Support Vehicle Coverage:
CDE900 Pro scan tool has a wide vehicle coverage and is compatible with 95% of all car models from the US,Europe,and Asia.
1.American Car List:
Such as:
Chrysler,Ford,GM,Jeep,Lincoln,Buick,Cadillac,Chevrolet,Dodge,HM,ect…
2.European Car List:
Such as:
Mercedes Benz,BMW,Volkswagen,Skoda,Audi,Opel,Porsche,Ford,Land Rover,Aston Martin,Mini,DR,Ferrari,Fiat,Abarth,Alfa Romeo,Maserati,Citroen,Saab,Volvo,GM,GMSA,Dacia,Seat,ect …
3.Asian Car List:
Such as:
Acura,Ssangyong,Proton,Honda,Mazda,Isuzu,Suzuki,Toyota,Nissan,Kia,Lexus,Mitsubishi,Hyundai etc.
Japanese cars compatible with JOBD protocol are not supported
Support 17 Languages
English,French,German,Italian,Spanish,Portuguese,Japanese, Russian,Dutch,Hungarian, Slovakia,Greek,Arabic,Korean,Turkish,Polish,Czech
More Functions
4 in 1 Live Data Stream:MUCAR CDE900 Pro car code scanner supports 4 in 1 data display,saves,reads and prints health reports.
One-Click Upgrade Via WIFI:Load the latest version,bug fixes,new vehicle models coverage,newly added parameters,and functionality on your scanner.
One-Click Print Diagnostic Report
Connect to wifi,contact customer service online,and get technical support
Aasiyah Haney
It’s okay
Germain Beaumont
It’s 2000 years of Chevrolet Iquanox. You keep on going. I bought it to register the key. Not Sken at all. So I’m waiting to buy another product. My belly button is bigger than my belly…
Anacleto Adornetto