Description
Information
Red wire is positive + . But don’t change connectors arbitrarily , if have mistake in changing , you need to be responsible for the problem !
suit for 20AH-230AH batteries
Heat dissipation:
Powerful air-cooled fan with good heat dissipation and thermostat
High efficiency:
Charging fast and intelligent, does not hurt the battery
Energy saving:
High frequency transformer technology
More energy efficient than older machines
Insurance:
Reversing protection, no longer afraid of mistakes
Reverse automatic protection
Intelligent constant current constant voltage charging, full charged automatic power off
Product model: ML-180-1
Applicable capacity: 20AH to 220AH
5A-25A current adjust
Product size: 285*150*110MM
Product weight; about 3.2 kg
Applicable battery type; li-ion , lipo ,lifepo4, other lithium battery
Plug type: Anderson 50A two-hole output plug ( if you need other plug , contact us )
Five features :
Digital display: The charger has a digital display screen, which can be viewed separately: charging current and charging voltage.
Overcurrent protection: When the battery is about to be fully charged, the charger will enter the protection mode, and a small current will enter the floating charge stage, and it will automatically reduce the current according to the voltage. Overcurrent protection prevents overcharging, better Protect battery life.
Power off when fully charged: When it is detected that the battery is about to be fully charged, the charging current will automatically decrease slowly until the battery is really satisfied. After one hour, the charger will automatically turn off the power to achieve the effect of power off. It is safer to use a full power off. (The lead-acid battery is uninterrupted and keeps floating charge)
Reverse connection protection: When the positive and negative poles of the charger are reversely connected to the battery, the charger will automatically turn off the output current and the current is 0. After adjusting the positive and negative polarity pairs, it will resume normal charging! (Reverse connection protection is required when charging Insert the battery end, do not turn on the switch first)
Polarity detection: In the case of not plugging in the 220V power supply, first plug the electric vehicle with the plug of the charger. If the positive and negative poles are correct, the battery connection light on the charger will light up. If it is detected by reverse polarity, then the battery connection light on the charger will not light up!
Reviews
0.0 Average Rating Rated ( 0 Review )
There are no reviews yet.